Home > Temperature Transmitter Sensor >

Case Isolated Accelerometer Acceleration Transducer GE 330400-01-05 Bently Nevada 330400/330425

Product Categories

Differential Pressure Gauge [182]
Digital Pressure Gauge [62]
Stainless Steel Pressure Gauge [36]
Precision Pressure Transmitter [136]
Programmable Logic Controller [187]
Float Level Switch [68]
Pneumatic Valve Positioner [64]
Temperature Transmitter Sensor [201]
Hart Field Communicator [59]
Solenoid Valve [78]
Control Valves [68]
High Accuracy Flow Meter [66]
Submersible Water Pump [11]
Pressure Transmitter Manifold [24]
Ultrasonic Level Meter [32]
Voltage Current Power Meter [63]

Mengchuan Instrument Co,Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Case Isolated Accelerometer Acceleration Transducer GE 330400-01-05 Bently Nevada 330400/330425

Name: Case Isolated Accelerometer Acceleration Transducer GE 3304000105 Bently Nevada 330400330425
Brand: Bently Nevada
Price: 800 USD

Quality Case Isolated Accelerometer Acceleration Transducer GE 330400-01-05 Bently Nevada 330400/330425 for sale

Brand Name : Bently Nevada

Model Number : GE 330400-01-05

Certification : CE

Place of Origin : USA

MOQ : 1

Price : USD$800/PC

Payment Terms : L/C, D/A, D/P, T/T, Western Union, MoneyGram

Supply Ability : 500

Delivery Time : 5-8 work days

Packaging Details : Carton

Sensitivity : 10.2 mV/m/s2 (100 mV/g) ±5%

Frequency Response : 10 Hz to 15 kHz

Temperature Sensitivity : -11% to +3% typical over the operating temperature range

Transverse Sensitivity : Less than 5% of axial

Mounted Resonant Frequency : Greater than 30 kHz

Amplitude of Resonant Peak : 20 dB maximum

Maximum cable length : 305 metres (1000 ft) with no degradation of signal

Input Voltage : Input Voltage

Bias Current : 2 mA nominal

Output Bias Voltage : -8.5 ± 0.5 Vdc

Grounding : Case isolated

Operating and storage temperature : Operating and storage temperature

Shock Survivability : 49,050 m/s2 (5000 g) peak, maximum

Relative humidity : 100% condensing, non-submerged

IP Rating : IP 68

Weight (no cable) : 100 g (3.5 oz), typical

Diameter : 23 mm (0.93 in)

Height : 59 mm (2.3 in), including mounting stud

Connector : 3-pin MIL-C-5015 Receptacle 316L stainless stee

Mounting Surface : 32 minch rms

Case Material : 316L stainless steel

Mounting Angle : Any orientation

Contact Now

GE 330400-01-05 Bently Nevada 330400/330425 Accelerometer Acceleration Transducer With Three-Wire Piezoelectric Accelerometers

These accelerometers are intended for critical machinery applications where casing acceleration measurements are required, such as gear mesh monitoring. The 330400 is designed to address the requirements of American Petroleum Institute Standard 670 for accelerometers. It provides an amplitude range of 50 g peak and a sensitivity of 100 mV/g. The 330425 is identical except it provides a larger amplitude range (75 g peak) and a sensitivity of 25 mV/g.

If housing measurements are being made for overall protection of the machine, thought should be given to the usefulness of the measurement for each application. Most common machine malfunctions (imbalance, misalignment, etc.) originate at the rotor and cause an increase (or at least a change) in rotor vibration. In order for any housing measurement alone to be effective for overall machine protection, a significant amount of rotor vibration must be faithfully transmitted to the bearing housing or machine casing, or more specifically, to the mounting location of the transducer.

In addition, care should be exercised in the physical installation of the transducer. Improper installation can result in a degradation of the transducer’s performance, and/ or the generation of signals which do not represent actual machine vibration. Integration of the output to velocity can worsen this. Extreme caution should be exercised if integrating to velocity. For high quality velocity measurements the 330500 Velomitor Sensor should be used.

Upon request, we can provide engineering services to determine the appropriateness of housing measurements for the machine in question and/or to provide installation assistance.

Specification

item	value
Place of Origin	USA
Brand Name	Bently Nevada
Model Number	330400-01-05
Input Voltage	-24 ± 0.5 Vdc
Bias Current	2 mA nominal
Grounding	Case isolated
Temperature	-55°C to +121°C (-67°F to +250°F)
Relative humidity	100% condensing
IP Rating	IP 68
Weight (no cable)	100 g (3.5 oz)
Diameter	23 mm (0.93 in)
Height	59 mm (2.3 in)
Case Material	316L stainless steel

Case Isolated Accelerometer Acceleration Transducer GE 330400-01-05 Bently Nevada 330400/330425

Product Tags:

Case Isolated Acceleration Transducer

GE 330400-01-05 Acceleration Transducer

Case Isolated Accelerometer Acceleration Transducer GE 330400-01-05 Bently Nevada 330400/330425 Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Mengchuan Instrument Co,Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!